Philips POCKET MEMO PSE8200 Manual Del Usuario página 15

Add to or overwrite a recording
You can edit an existing recording by overwriting a part of it or
inserting additional recording.
1
While the recorder is in stop mode, press F2 (Menu) and
select Record > Edit mode.
2
Set the required editing mode ( Edit mode, p. 25).
• Append mode: add additional recording after existing
recording in a file.
X The symbol is displayed in the information bar at the
top of the screen when in append mode and the LED
lights in red while recording.
• Insert mode: insert additional recording without
overwriting existing recording in a file.
X The symbol is displayed in the information bar at the
top of the screen when in insert mode and the LED
lights in green while recording.
• Overwrite mode: overwrite a previous recording
starting from any point within the file.
X No symbol is displayed in the information bar at the top
of the screen when in overwrite mode and the LED
lights in red while recording.
3
Press + / – to select the file into which the insertion should
be made.
4
When using the insert or overwrite mode, play, forward or
rewind to the position where the insertion should be made.
5
To start recording, point the microphone toward the sound
source, press the REC STANDBY button to enter record-
standby mode and move the slide switch to the G REC
position.
X The LED lights in red in overwrite or append mode or
green in insert mode while recording.
6
To stop recording, move the slide switch to the H PAUSE
position and press the REC STANDBY button.
Note
• When you edit, the recording quality of the original
recording is used.
• The Insert recording mode is not available when the
recording format is MP3 or PCM.
15
EN