Publicidad
Idiomas disponibles
Idiomas disponibles
Control panel
2
1
1. Headphones jack:
A stereo mini plug for headphones can be inserted
here.
2. Power button:
This button turns the D1 on or off.
3. VOLUME Knob:
This knob adjusts the volume for the LINE OUT and
the headphones jack.
4. PIANO SONG button:
This button is used to enter the Piano song mode, after
which the button lights up. Simultaneously pressing
this button and the TRANSPOSE button enters the
Sound demo song mode.
5. TRANSPOSE button:
This button is used to adjust transposition. While trans-
posing, the button lights up. Simultaneously pressing
this button and the PIANO SONG button enters the
Sound demo song mode.
6. FUNCTION button:
This button is used to enter the Function mode, where
pitch, temperament and other settings can be speci-
fied. Hold down the button to enter the MIDI function
mode, where MIDI settings can be specified. The button
lights up when the D1 enters the Function mode and
blinks when it enters the MIDI function mode.
7. TOUCH button:
This button lets you select the keyboard sensitivity.
8. BRILLIANCE button:
This button is used to adjust the brightness of the tone.
9. REVERB button:
This button is used to turn on/off the reverb, which
adds ambience to the sound. When this effect is on, the
button will be lit up.
10. CHORUS button:
This button is used to turn on/off the chorus, which
adds richness to the sound. When this effect is on, the
button will be lit up.
11. BANK button/LEDs:
This button is used to select the desired sound bank.
The LED for the bank that's currently selected will
light up.
4
Parts and their functions
6
4
5
3
8
9
10
11
7
15
12
14
13
12. S ound buttons:
This button is used to select from 30 sounds (10 × 3
banks). Two buttons can be pressed to play two sounds
simultaneously (Layer mode).
13. Display:
The display shows settings, for example, for the Func-
tion mode and the metronome.
14. +, – buttons:
These buttons are used to select a value for the various
settings.
15. METRONOME button:
This button is used to start/stop the metronome. While
the metronome is being used, the button lights up. In
addition, hold down the button to enter the Metronome
settings mode, where various metronome settings can
be specified.
16. MIDI (IN, OUT) connectors:
These are connectors that are used to connect other
MIDI devices (sequencer, keyboards, etc.).
IN:
Data input
(to be connected to the MIDI OUT connector of
another MIDI device).
OUT: Data output
(to be connected to the MIDI IN connector of
another MIDI device).
17. DC 9V jack:
Connect the included AC adapter here.
18. DAMPER jack:
Connect the damper pedal included with the D1, or a
DS-1H damper pedal (sold separately).
19. LINE OUT (L/MONO, R) jack:
These are the main audio output jacks. Use an audio
cable with a standard phone jack to connect the D1 to
the input jacks of a speaker with amplifier or to the
AUX IN of other audio equipment.
Use the VOLUME knob to set the output volume.
Rear panel
16
17
18
19
Publicidad
