Publicidad
Idiomas disponibles
Idiomas disponibles
2.4.
Space and positioning
Make sure that there are no heat sources, flammable substances or electromagnetic
sources in the installation area, either when installing the product or throughout
the product's lifetime.
In addition, the installation site must be sufficiently ventilated to ensure proper
heat dispersion. Make sure that the chosen area is covered by Wi-Fi coverage.
Before installing, ensure that environmental conditions (such as temperature, altitude and
humidity) comply with the product specifications.
To ensure the device functions properly, and to enable it to be used properly by the user, the
space around the device must be left clear to allow air to circulate and the cable to be moved
properly. It must also allow charging by the user and routine or non-routine maintenance
operations to be conducted safely.
It is necessary to take into account the space needed to park the electric vehicle to be charged.
eProfessional must not be installed in places:
at risk of explosion (EX environment)
used for escape routes
where articles may fall on it (e.g. suspended ladders or car tyres) or where it is likely to be
hit and damaged (e.g. close to a door or in vehicle operating spaces)
where there is a risk of pressurized jets of water (e.g. because of washing systems, power
washers or garden hoses)
eProfessional cannot be installed:
on walls that are not fixed;
on walls made of inflammable material or covered in inflammable material
(e.g. wood, carpet, etc.)
The following indications must be followed when choosing the position to install eProfessional:
avoid exposure to direct sunlight, if necessary, by installing a canopy
avoid direct exposure to the rain so that deterioration due to bad weather does not occur
ensure sufficient ventilation for the device – do not mount it inside a niche or a closet
avoid accumulation of heat - keep the device away from heat sources
avoid exposure to water infiltration
avoid excessive leaps in temperature.
15
Publicidad
