Serta Motion Essentials VI Manual Del Propietário página 10

connecting strap (optional)
If any split setup is being installed, plastic Connecting Straps are provided (one per base) to secure the bases together.
STEP 1
With the bases in their desired
location, slightly loosen both legs to
allow the strap to fit on the leg bolt,
between the leg washer and frame.
8
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 2
Slide side (a) of the Connecting Strap onto leg bolt. Swing the strap and
connect side (b) to the leg bolt. Secure the strap by shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap and repeat
on other end of the base.
a
b