Publicidad
Idiomas disponibles
Idiomas disponibles
safety precautions and usage statements
information on activation and deactivation of this feature can be found on page
10.
Power Ratings:
INPUT: AC 100–240V 50/60 HZ 1.5A
OUTPUT:
DC 29V 1.8A
WATTS: 52.2W
Product Ratings:
The lift motors are not designed to operate continuously for more than two [2]
minutes in an eighteen [18] minute time period or approximately 10% duty cycle.
Attempting to circumvent or exceed this rating will shorten the life expectancy of
the product and may void the warranty.
Weight Limits:
This product is not rated to support weights in excess of 750 pounds. The base
will structurally support this weight, provided it is evenly distributed across the
bed base. The adjustable base is not designed to support or lift this amount in the
head or foot sections alone. Exceeding this weight restriction could damage the
bed and/or cause injury and will void the warranty.
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to maintain its distance
from the wall, will make contact with the steel platform supports of the base
creating a contact noise. When entering, exiting or shifting weight on the base,
this contact noise may be audible as the wheels make contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight whenever possible.
For spot cleaning, wipe area with a light damp sponge or vacuum with a soft
brush attachment to remove particles. Keep at a minimum of 30cm (12 inches)
away from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with a clean
cloth dampened with warm water. Do not wet excessively. A soft bristle brush
may be used to remove ingrained soil. Avoid scratching by gentle brushing. Wipe
with a clean cloth dampened with warm water to remove residues after brushing.
Dry in shade away from direct heat.
2
If persistent marks remain visible after cleaning, seek professional advice.
SAVE THESE INSTRUCTIONS.
FCC Compliance:
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Publicidad
