emergency battery backup strap
Two (2) 9 Volt alkaline batteries are required to operate the power down feature and are NOT included.
STEP 1
Disconnect the Power Supply from the Input Cord.
STEP 2
Connect the Battery Backup Strap to the (2) 9 Volt alkaline batteries. Do
not mix brand name Batteries.
12
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 3
Connect the end of the Battery Backup Strap to the input power cord
that is attached to the control box.
Battery Backup Strap
Note: Detach the Battery Backup Strap after the emergency is over, as
the system will continue to draw power from the batteries even if not in
use.
STEP 4
Use the remote control to lower the base to a flat position.
Control Box
Input Cord