Walgreens WGNBPW-910 Manual Del Usuario página 10

1. With the cuff wrapped around your wrist, press the
START/STOP button. Do not inflate the cuff unless
it is wrapped around your wrist. All digits will light
up, checking the display functions. The checking
procedure will be completed after about 3 seconds.
START
STOP
2. After all symbols disappear, the display will show "00".
The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
17
3. When the measurement is completed, the cuff
will deflate entirely and systolic pressure, diastolic
pressure and pulse will be shown simultaneously
on the LCD screen. The measurement is then
automatically stored into memory.
Note:
• This monitor automatically turns off approximately 1
minute after last operation. You may also press the
START/STOP button to turn the unit off.
• To interrupt the measurement, you may press the
START/STOP (recommended) or the M buttons.
The cuff will deflate immediately after a button is
pressed.
18