Bosch 500 Serie Manual Del Usuario página 12

Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
Troubleshooting table
Disruption Possible
cause
Appliance is Plug is not
not working plugged in
Power outage Check whether other
Fuse defec-
tive
Lighting not Bulbs defec-
working. tive.
--------
Changing bulbs
WARNING
9
RISK OF ELECTRIC SHOCK
When changing the bulbs, the bulb socket contacts
are live. Before replacing the bulb, unplug the
appliance or switch off the circuit breaker in the fuse
box.
Important! Use only bulbs of the same type and the
same power (see also lamp socket or rating plate).
12
Solution
Connect the appliance
to the mains
kitchen appliances are
working
Check in the fuse box
whether the fuse for the
appliance is in working
order
Replace bulbs, see
chapter "Replace Bulbs."
Changing halogen bulbs
Note: When using halogen bulbs, do not touch the glass
bulb. Use a clean cloth to insert the halogen bulb.
Carefully remove the bulb ring with a suitable tool.
1.
Withdraw the bulb and replace with the same type
2.
bulb.
Replace bulb cover.
3.
Plug in or flip breaker switch again.
4.
Replace the bulb with one of the same type:
Voltage (V): 12 V AC
Max. power: 20 W
Socket: G4