Omnitronic DSS-1 Manual Del Usuario página 18

4.2 Frontpanel
1. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
2. SINGLE-BUTTON
For choosing single playback or continous play. The indication "SINGLE" means that the CD-player is in
Single-mode. The current track is then played once and the player goes into Pause-mode at the beginning of
the next track. By pressing the Single-button, the CD-player changes into normal playback mode and the
display shows "CONTINUE".
3. SEARCH-BUTTONS
Pause-mode:
To cue and reverse at a very low speed. You can exactly select the starting-point. The selected frame is
repeated if you have pressed the Cue-button before (CUE-LED is shining).
Playback-mode:
Use the Search/Scan-buttons in order to cue and reverse at a very high speed.
4. CUE-BUTTON
Pause-mode:
In the pause-mode, you can cue by pressing and holding the Cue-button. As soon as you let the Cue-button
loose, the player returns to the track-start or the Cue-point.
5. DISC COMPARTMENT-DOOR
To enter the disc.
6. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
7. PITCHFADER
You can adjust the desired speed with the Pitchfader after pressing the Pitch-button. The display shows the
current percentage. If the Pitch-button is not pressed, any adjustment on the Pitchfader will have no effect.
18/45 10553150_V_1_0.DOC