Publicidad
Idiomas disponibles
Idiomas disponibles
8. OPEN-BUTTON
Press this button to open the Disc compartment-door. The door opens.
9. PHONO/LINE /CD-SWITCH
Used to select the input to be sent to the individual channel.
10. GAIN-CONTROL
Used to set the level of the input signal.
11. CROSSFADER
Mixes the signals of one channel with another. If the crossfader is in the center-position, both channels can
be heard.
12. CHANNEL-FADER
Used to adjust the input level of each channel.
13. CUE-SWITCH
Use the CUE-switch in order to select the channel to be monitored.
14. POWER LED
The Power-LED is illuminated when the mixer is ready for use.
15. MASTER-CONTROL
Adjusts the level of the master output.
16. CUE LEVEL-CONTROL
With the CUE LEVEL-control, you can adjust the headphones volume without changing the output signal.
17. MIC LEVEL-CONTROL
With the MIC LEVEL control, you can adjust the microphone volume.
18. STOP BUTTON
For stopping the playback
19. PITCH-BUTTON
Press the Pitch-button in order to adjust the playback speed by ± 16 % (red LED illuminated).
20. TIME/OUTRO-BUTTON
By using the Time-button, the time-indication can be switched from track remain time (Remain) to track
playback time (Elapsed), outro-function (Outro) or total remain time (Total Remain). For activating the Outro-
function, the display needs to show „Outro". In this mode, the last 30 seconds of every track are played
21. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by +/- 16 %. Furthermore, you
can synchronize the bass-beat of two different signal-sources with these buttons. Please refer to 6.6
Synchronisation of the playback-speed.
22. DISPLAY
LCD-display for displaying the different modes and functions. Please refer to the explanations under 6.3
LCD-display.
19/45
10553150_V_1_0.DOC
Publicidad
