Publicidad
Idiomas disponibles
Idiomas disponibles
8. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
Replacing the Crossfader
Instructions for replacing the crossfader:
• Remove the fader knob.
• Remove the two outer screws on the fader-panel.
• Take the fader out and unplug the connection-cable.
• Connect the new fader and fix it in the device.
The fader-panel of the replacement-crossfader cannot be used for the Design-version. In order to exchange
the fader-panels, additionally unscrew the 2 inner screws and exchange the two fader-panels.
9. TECHNICAL SPECIFICATIONS
Power supply:
115/230 V AC, 50/60 Hz ~
Power consumption:
40 W
Available disc:
Standard CDs 8 and 12 cm
Quantisation:
D/A-converter: 1 Bit
Sampler frequency:
44.1 kHz
Pitch adjustment:
+/- 16 %
Distortion:
0.02 %
S/N-ratio:
88 dB
Channel seperation:
80 dB
Frequency range:
20 - 20,000 Hz; +/- 1 dB
Analogue output:
unbalanced via RCA
Output level:
7 Vrms
Dimensions:
495 x 270 x 110 mm
Weight:
4.6 kg
Please note: Every information is subject to change without prior notice. 22.12.2004 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
24/45
10553150_V_1_0.DOC
Publicidad
