Turning A Square Corner; Basic Zigzag; Overcasting With Zigzag Stitch - Janome Buzzin Blue Manual De Instrucciones

Turning a Square Corner

Stop stitching at the corner of the fabric.
Lower the needle by turning the handwheel
counterclockwise.
Raise the presser foot and turn the fabric
counterclockwise 90°.
Lower the presser foot and begin stitching in
the new direction.

Basic Zigzag

Stitch selector:
Needle thread tension:
The zigzag stitch is one of the most common
and versatile stitches.
It can be a utility stitch for hemming, over-
casting, mending and darning.
It can also be used for appliques or as a
decorative stitch.
Select a pattern, which is suited for your
sewing needs from the 3 patterns available.

Overcasting with zigzag stitch

Stitch selector:
Needle thread tension:
Finish raw edge of the fabric to prevent it
from ravelling.
Start overcasting about 1/8"(0.3 cm) inside
the raw edge of the fabric.
The stitches on the right should just clear the
fabric edge.
26
F, G, H
2 to 5
G, H
2 to 5