Tricot Stitch; Scallop Stitch - Janome Buzzin Blue Manual De Instrucciones

Tabla de contenido

Publicidad

Tricot Stitch

Stitch selector:
Needle thread tension:
This stitch is used to finish the seam
allowance on synthetics and other fabrics that
tend to pucker. The stitch is also excellent for
darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm)
seam.
Trim excess close to stitching. Be careful not
to cut the stitches.

Scallop Stitch

Stitch selector:
Needle thread tension:
Sew the stitches approximately 3/8˝ (1 cm)
inside of the edge of fabric.
Trim the outside of the stitches as shown.
Make sure you don't cut the thread.
28
J
1 to 4
I
1 to 4

Publicidad

Tabla de contenido
loading

Tabla de contenido