Publicidad
Idiomas disponibles
Idiomas disponibles
If you bought additional wireless sirens, then you can easily add them to your system by following
the steps in this section.
First, plug in and/or turn on the wireless siren. Then set the siren into programming mode(please
check user manual of siren to come into programming mode), then press "send code" of panel and
wait 3 seconds. Once those steps are done, then unplug and turn off the siren, and wait for at least
5-10 seconds. Your siren is now programmed. You can plug in the siren anywhere within range of
the main panel, and test it when you're ready by triggering the alarm to confirm.
EN
POWER/BATTERY NOTICES
4.
The panel can optionally alert you when batteries are getting low, or when power is lost or
restored on the main panel. There are a few options for alerts available, as shown.
(SIM card required for SMS text messages or for calls.)
Main Menu -> Alarm -> Power Battery Notices
For each event, there are 4 alert options.
EN
WORKING WITH ACCESSORIES
Remote control -> Coding remote controls with the panel as following: Main Menu -> Sensors -> Remote
No remotes have been added
While the panel is
yet.Press OK to enter listening
listening press any
mode.
key on the remote.
42
Publicidad
