Descargar Imprimir esta página

hoop SPIKE Manual Del Usuario página 47

Sistema de alarma inalambrico

Publicidad

Idiomas disponibles

Idiomas disponibles

( 2 ) Settings for Sensors
Each sensor will have its own settings that can be adjusted individually.
· NAME
Assign a custom name for the sensor
· TYPE
This Type label tells the users how to respond to the alarm
· MODE
The mode controls how and when this sensor would trigger the alarm. (See next page)
· ZONE
Change the Zone number where the sensor is located. When the alarm is triggered, the system will
report the Zone number that was triggered, as well as the name of the accessory that triggered the
alarm. (For example:"Zone 01, Smoke Alarm.") Grouping your accessories into Zones will make it
easy to tell where an alarm has been triggered for systems with multiple accessories.
· SIREN
Choose whether this sensor will cause the sirens to sound or not (silent alarm).
· CHIME - ideal for small businesses.
If Chime is enabled and the system is disarmed, the panel will play a chime sound when this sensor is
triggered.
· DELAY
If the delay is not set to zero, then the system will wait before the alarm is triggered (Entry Delay). This
gives you time to go to the main panel and disarm the system before the alarm is triggered.
44

Publicidad

loading