hoop SPIKE Manual Del Usuario página 49

· Locked Padlock (on top dx) Arm in Away Mode
· House Icon (bottom sx ) Arm in Home Mode
· SOS (bottom right) Trigger the panic alarm
Arm or disarm by the keypad of the panel:
Disarm/Arm: Press the Disarm/Arm Button (unlocked padlock). If the Keypad Lock is
enabled, you will need to enter your 4-digit User Password.
( 2 ) Arm in Away Mode: Press the Arm Button (locked padlock). If the Exit Delay is enabled, then
the system will be armed when the Exit Delay is finished. You can skip the Exit Delay by pressing
the Arm Button again.
( 3 ) Arm in Home Mode: After pressing the Arm Button once, you can press the Arm Button
again to switch from arming in Away Mode to arming in Home Mode instead. △Note: If the Exit
Delay is enabled, you'll also need to press the Arm Button once to skip the Exit Delay. (see above
re: Arm in Away Mode)
Controlling the System over the Phone
In addition to using the free mobile app, you can also place a call in to the system. The system will
answer your call after a certain number of rings (specified in the Siren & Ring menu), and prompt you
to enter your pass-word. After that, you can press one or more keys on your phone to control the
system and access various features. You can arm and disarm the system, and even enable an
intercom.
Here's a full list of the commands available for controlling the system over the phone. When you place
a call to the system:
Enter your password when prompted, then...
Press 0 - Check alarm status
Press 1 - Enable 1-way Intercom / Listen In (SIM card required)
Press 2 - Turn sirens on
Press 3 - Turn sirens off
Press 4 - Arm the system in Away Mode
Press 5- Disarm the system
Press 6 - Enable 2-way Intercom (SIM card required)
Press 7 - Disable 2-way Intercom
Press * - Repeat the menu options
Press # - Turn off the alarm, and re-arm the system
When the system calls you:
Press # - Prevents the system from calling any other phone numbers. This action does not disarm
the system.
Placing an Outbound Call from the System
You can also dial one of your programmed Contact Phone Numbers by navigating to the Contacts
Menu, choosing the number, and the selecting Dialing.
46