Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
BREAKDOWN
The indicator is not on.
The compressor doses not start.
The indicator is on, but the com-
pressor doesn't work and buzzes
only
The compressor stops a minute
after start, and restart after a few
minutes, and so repeatedly.
The compressor works normally,
but the temperature in the
cabinet lowers too slowly.
The noise is too loud
THE FOLLOWING ARE NOT FAULTS:
1. When the freezer is working or after is stops for a while, the refrigerant in the pipes is cycling
and gives out＂running water＂sounds.
2. The surface temperature of the compressor may be up 70℃~80℃ when it is working.
3. The back side of step freezer gives out heat.
In rainy season, the outer surface of the cabinet may have dew, which makes no defects on
4.
normal use. Just dry it with a piece of cloth.
CASE
The plug isn't connected to the socket
really.
No power.
The power voltage is＜187V.
The power voltage is＞242V.
The door is opened too frequently.
The food in the cabinet is too much,
and placed improperly.
The frost film is too thick.
The surface of the condenser is too
dirty.
The door seals badly.
The freezer is placed unstably.
The fixing of the freezer is loose.
there's contact between pipes.
REMOVAL METHOD
Replug it.
Connect the socket with power.
Put a power-regulator more than
1000W power together.
Reduce open times.
Place foods properly keep
place
between
them
ventilation of cold air.
Take out foods and defrost.
Stop and clean the condenser.
Adjust the door seal.
Place it stably.
Tighten the fixing.
Separate them.
for
20
Publicidad
