Publicidad
Idiomas disponibles
Idiomas disponibles
Moving Dock
D9
Lift up and move the dock. Do not move the
dock by lifting dock base, water tank handles
or dust container cover directly to prevent
the dock from falling off.
Dirty Water Tank
D10
* Clean as required
Open the dirty water tank lid and pour out
the dirty water. Fill the tank with clean water,
close the lid, and shake. Pour out the dirty
water. Close the lid and then re-install.
Charging Contact Areas
D11
* Clean monthly
Use a soft dry cloth to wipe the charging
contacts on the robot and the dock.
Replacing Disposable Dust Bag
D12
* Replace as required
D12-1—Remove the dust container cover.
D12-2—Remove the disposable dust bag
in the direction of the arrow and
discard it.
Notes:
• The dust bag handle seals the bag on removal to
prevent leakage.
• Always install a dust bag before closing the dust
container cover to avoid auto-emptying without the
bag. You can also disable auto-emptying in the app.
D12-3—Clean around the filter with a dry
cloth. Install a new disposable dust
bag in place along the slot and
unfold the dust bag to maximize
emptying performance.
D12-4—Close the cover of the dust container
and make sure it is securely sealed.
Cleaning Tank
D13
* Clean as required
D13-1—Remove the cleaning tank.
D13-2—Rinse the cleaning tank and the
filter with water.
D13-3—Reinstall the cleaning tank.
Basic Parameters
Robot
Model
QX0PEA
14.4V/5200mAh (TYP)
Battery
lithium-ion battery
Rated Input
20VDC 1.5A
Charging Time
Approx. 4 hours
Note:
The serial number is on a sticker on the underside
of the robot.
12
Empty Wash Fill Dock
EWFD11LRR or
Model
EWFD12LRR
Rated Input Voltage
120V~
Rated Frequency
60Hz
Rated Input
7.5A
(Dust Collection)
Rated Input
1.0A
(Non-Dust Collection)
Rated Output
20VDC 1.5A
14.4V/5200mAh (TYP)
Battery
lithium-ion battery
Publicidad
