Descargar Imprimir esta página

Bosch MFW3850B Instrucciones De Uso página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 116
en
Control and display elements 
Control and display
elements
MFW35...
Button ä
Press button ä to switch on the appliance. 
The drive will start up at once.
Button ö
Press button ö to switch off the appliance. 
The drive stops.
MFW36.../MFW38...
Button k
Press button k to switch on the appliance. 
The drive starts running immediately with 
speed 2 (fast). Press button k again to 
switch off the appliance. The drive stops.
Button +
Pressing button + briefly switches 
the speed of the appliance between 1 
(slow) and 2 (fast). X "Speed setting" see 
page 20
Pressing and holding button + 
starts the reversing function. X "Reversing 
function" see page 21
All models
Operation indicator
The operation indicator lights up when the 
appliance is switched on. On models with 
the reversing function the function indicator 
flashes for as long as the + button is 
pressed.
Release button
Press the release button to unlock an 
attachment fitted on the appliance. Only 
when the release button is pressed is it 
possible to turn the attachment clockwise 
and remove it from the base unit.
Cable storage compartment
The mains cable can be pulled out of the 
cable storage compartment or pushed back 
in again. Only ever pull the cable out as 
much as is required.
20 
Storage compartment
Unused perforated discs belonging to the 
meat mincer can be kept in the storage 
compartment and it closed with the cover.
Overload protection
To prevent serious damage to your 
appliance if the base attachment is 
overloaded, the agitator paddle has a 
notch (predetermined breaking point). If 
overloading occurs, the agitator paddle 
will break at this point. A new agitator 
paddle is available from Customer 
Service (No. 630701). Spare parts with 
a predetermined breaking point are not 
covered by our warranty obligations.
Replace agitator paddle
X Fig. C
1. Release the screw in the agitator paddle 
with a screwdriver (PH2) and remove 
the faulty paddle.
2. Fit a new agitator paddle and screw tight 
again.
Speed setting
ONLY MFW36.../MFW38...
Using the speed setting feature, the speed 
can be set to 1 (slow) or 2 (fast).
Caution!
For certain applications, it is imperative 
to use speed 1 (slow). Take note of the 
recommended speeds! Please also refer to 
table X Fig. M
  ■ Switch on the appliance with button k. 
The appliance will run at speed 2 (fast).
  ■ Press button + briefly. The 
appliance will switch to speed 1 (slow).
  ■ Press button + briefly. The 
appliance will switch back to speed 2 
(fast).

Publicidad

loading

Este manual también es adecuado para:

Mfw36 serieMfw38 serieMfw35 serie