Webasto ProCore Edge 30 Guia De Instalacion página 8

ProCore Edge 30 North America Installation Guide
3.3 – Positioning the Charger
CAUTION
Take precautions to avoid injury
M8 Lifting Eyebolts
M5 Panel Screws
when moving the charger.
Use appropriate material handling
aids (e.g., a pallet truck) to move the
charger into position. Webasto
recommends using a hoist with
straps or chains wherever possible,
especially when the charger is raised
above ground level.
Figure 2 – Attaching Points for M8
Lifting eye-bolts (M8 thread) can be
Lifting Eyebolts, Top Pen View
attached to four locations on the top
panel of the charger (Figure 2) to
aid the process. Remove the filler
screws with a 4mm hex key before
attaching the M8 lifting eye-bolts.
3.4 – Wall Mount Installation
Check with professional installation
personnel to determine proper
mounting techniques for all wall types.
(Figure 3, Figure 4, and Figure 5).
Figure 3 – Charger, Wall Mount Hanger,
Bottom Bracket and Screw
Figure 4 – Charger on Figure 5 – Bottom Bracket
Wall Mount Hanger Mounted to Charger
5912526 A01 Page 8 of 12 Webasto Charging Systems, Inc.