LF PROJECT SOURCE GT-S60LH Manual Del Usuario página 9

INSTALL YOUR FAUCET KIT
10. Insert the spray hose onto spray support assembly. Restrain the flexible
water supply hose with clip.
11. Connect the flexible water supply hose to the bottom of valve bodies as shown.
Align middle body in a position which will allow maximum clearance to
connect hoses. Carefully bend the hoses to fit available space. Carefully
thread the hose couplings to the sides of the middle body. Tighten nut
securely with wrench.
12. Connect the flexible water supply hose (W) to the spray hose and middle body.
Carefully bend the hoses to fit available space. Carefully thread the hose couplings to
the spray hose and the side of the middle body.
Note. Be sure to route the hand shower hose on the inside of the frame carrying
bars to avoid getting caught on or rubbing when shower hose is pulled.
9
10
11
12