Check The Condition Of The Substrate - BDS Maschinen AkkuMAB 3000 Instrucciones De Manejo

Work on scaffolding

Check the condition of the substrate

AkkuMAB 3000
WARNING
Risk of falling from sudden oscillating movements of the
machine .
When working on scaffolding, the machine can make a sudden
oscillating movement on starting or in the event of interruption to
the power supply.
►
Secure the machine with the safety chain (D) supplied.
►
Wear a safety harness to protect yourself against falling.
The magnetic clamping force is dependent on the condition of the
substrate. The clamping force is significantly reduced by paint, zinc
and scale coatings and rust.
The substrate must satisfy the following conditions in order to
achieve sufficient magnetic clamping force:
■
The substrate must be magnetic.
■
The clamping surface and the magnetic foot (10) must be clean
and grease-free.
■
The clamping surface must be completely smooth and level.
NOTE
►
Clean the substrate and the magnetic foot (10) of the machine
before use.
►
Remove any unevenness and loose rust from the substrate.
The best clamping effect is obtained on low-carbon steel substrate
with a thickness of at least 20 mm.
Preparation
45