Publicidad
Idiomas disponibles
Idiomas disponibles
USE
JUG ASSEMBLY
1.
Position the seal (thin) on the blade assembly.
2.
Insert the blade attachment into the holder and tighten counter-clockwise. You will see a mark
with 'open' and 'close' on the bottom.
3.
Hold the jar upside down. Place the (thick) sealing ring on the jug. Screw the blade attachment
onto the jug and tighten.
4.
Turn the jug right side up and fill with the desired ingredients. Make sure that you do not exceed
the maximum amount.
5.
Put the lid on the jug and tighten clockwise. Look carefully at the shape of the lid so that it fits
well.
6.
Position the measuring cup in the lid and jug and screw it tight in a clockwise direction.
1
BOTTLE ASSEMBLY
1.
Place the (grey) sealing ring on the small blade attachment.
2.
Fill with desired ingredients. Make sure that you do not exceed the maximum amount.
3.
Screw the blade attachment onto the bottle and turn right side up.
USE
1.
Make sure that the speed regulation button is at "0ff".
2.
Put the plug in the outlet. The light on the speed control flashes red.
3.
Place the jug/bottle on the motor housing. If you use the bottle, turn it clockwise so that it engages
with the motor housing. Turn the speed control to the desired speed. The light on the speed control
turns white.
4.
Or use the function buttons. Set the speed control to the on position and press one of the function
buttons:
32
DO734BL
2
2
5
6
1
3
3
3
6
3
Publicidad
