·
Smoothie: this function is perfect for making smoothies. The blender works for 1 minute with
90% speed.
·
Ice crushing: this function is designed to crush ice cubes. The blender will alternate between on
and off for 30 seconds.
·
Pulse: pressing this button will pulse the appliance for quick and delicate mixing. Hold down the
button to keep the function on for longer.
5.
Turn off the blender by setting the speed knob to 0ff.
6.
Unplug the blender after use.
Caution:
·
For each use, the consecutive operation time should not exceed 1 minute. Between two continuous
cycles at least 10 minutes resting time should be maintained. The appliance needs to cool down to
room temperature before starting the next blending cycle.
·
Never use boiling liquids (maximum 60 °C) or do not use the blender when the jar is empty.
·
You cannot select any of the function buttons when using the speed control. First switch the control to
the on position.
·
If the pitcher is not mounted correctly, the appliance will not work. When placing the bottle on the
appliance, be sure to tighten it firmly clockwise in the motor housing until it clicks firmly into place.
·
Always fill with enough liquid to achieve a perfect mixture. We also recommend you add some water
to the pitcher when mixing ice cubes with the 'ice crushing' feature.
·
For the 'smoothie' and 'ice crushing' functions, the appliance stops working as soon as the pre-
programmed programme ends. If you want to stop the appliance earlier, press the button of the
selected function again
·
If you want to add ingredients while you are blending, remove the measuring cup from the lid and put
the extra ingredients into the jar through this fill opening. (only when using the jug).
CLEANING AND MAINTENANCE
Always clean the blender immediately after us for easy cleaning. Do not let food dry in the jar or the blade
assembly, this will make them harder to clean.
1.
Pour some warm soapy water into the pitcher. Turn the speed control to 'on' and press the pulse
button. When the programme is finished, the appliance will automatically turn off. Turn the speed
control to 'off'. Then empty the pitcher and rinse it with clean water.
2.
Unplug the blender before continuing with cleaning.
3.
Disassemble the removable parts.
4.
Wash all parts – except the motor – with warm soapy water and rinse clean under the tap.
! Do not touch the sharp blades and take extra care. Leave the blade to dry upside down, ensuring
it remains out of the reach of children.
5.
The jug, bottle, and both lids may also be cleaned in the dishwasher on a programme up to 60°C
max.
6.
Wipe the motor unit clean with a damp cloth and dry thoroughly.
7.
Make sure all parts are dry before reassembling the blender.
Caution:
·
Never immerse the motor unit in any liquid to avoid the risk of electrical shock.
·
Do not use any rough scouring pads or cleaners on the parts or on the finish of the appliance.
·
Store the blender with the lid off. This will help you avoid unpleasant odours.
www.domo-elektro.be
33
DO734BL