Publicidad
Idiomas disponibles
Idiomas disponibles
MEMORY FUNCTIONS
Recalling Measurements in Memory
Select the desired user, 1 or 2, to
review
. The user icon displayed represents
the memory bank where the result will be stored.
When the monitor is OFF, press and hold the MEM
button for 4 seconds; the user icon will appear on
the display. Press MEM to toggle and select the
desired uesr. Press SET to confirm.
This monitor stores and recalls up to 60 readings in
per user. These measurements can be shared with
your physician or trained healthcare professional.
1. Press and release the MEM button. The unit
will first display the average of the last three
measurements, Fig 1.
2. Press the MEM button again to begin scrolling
through the saved measurements. Measurements
will appear on the display from most current to
oldest; the memory number will appear on the lower left corner.
3. All results for a given measurement will display, including measurement
results, pulse rate, Hypertension Indicator and Irregular Heartbeat
alert (if applicable). The date/time stamp will cycle on the lower left—
memory number, time, date, repeat, Fig 2.
4. When the number of readings exceeds 60 , the oldest data will be
replaced with the new record.
18 • ENGLISH
Fig. 1
Fig. 2
Publicidad
