smartheart 01-508EM Manual De Instrucciones página 25

ERROR CODES
Code
E 01
The cuff is not secure/nottight
enough.
E 2
Device detected motion while
measuring.
E 3
Measurement process does not
detect the pulse.
E4
Treatment of the measurement failed
A calibration error occured; xx may
Eexx
also be a digital symbol, such as 01,
02 etc. Any of these scenarios are a
calibration error.
Out of measurement range.
out
IF AN ERROR CODE PERSISTS OR IS NOT REMEDIED,
PLEASE CONTACT CUSTOMER CARE AT 866-326-1313.
Meaning
Corrective Action
Re-apply the cuff and attempt new
measurement.
Remain still and attempt new
measurement.
Loosen any clothing on the arm; attempt
a new measurement.
Relax for several minutes and attempt
new measurement.
Retake the measurement. If the problem
persists, contact customer service for
further direction or consult the warranty
in this manual for instructions on return
for repair.
Result is out of range; relax for a
moment and attempt new measument.
ENGLISH • 25