Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Your Fan and Remote Control
□
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan.
□
Speed setting for warm or cool weather depends on factors such
as the room size, ceiling height, number of fans and so on.
□
The fan is shipped from the factory with the reversing switch (YY)
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (located on the top of the
motor housing) to the opposite position, and turn the fan on again.
The fan blades will turn in the opposite direction and reverse
airflow.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
Power ON/OFF: Press and release the power button to turn the
fan and light on or off.
Fan speed: LEDs on the fan speed button will illuminate to the
corresponding speed.
Press and release 1 time: turns the fan on high speed.
Press and release 2 times: turns the fan on medium speed.
Press and release 3 times: turns the fan on low speed.
Press and release 4 times: turns the fan off.
Light ON/OFF
Press and release the button to turn the light on or off.
Press and hold the button to activate the dimmer function.
Correlated Color Temperature (CCT)
changing
Push and release the button to cycle through the three color
temperature options.
Option 1: Warm White.
Option 2: Soft White.
Option 3: Daylight.
NOTE: The default temperature of the ceiling fan light is 3000k
(Soft White).
YY
11
Please contact 1-855-HD-HAMPTON for further assistance.
Warm weather
Cool weather
HAMPTONBAY.COM
Publicidad
