Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly - Hanging the Fan (continued)
3
Making the electrical connections
WARNING: Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connecting nuts (AA) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
NOTE: If your house wiring does not have a red switch wire,
please cap the red receiver wire using an electrical nut and do
not connect to any other wire.
□
Spread the wires apart so that the green and whites are one
side of the outlet box and the black wire is on the other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (AA).
□
Connect the receiver (F) black wire to the household black
(hot) wire using a wire connecting nut (AA).
□
Connect the receiver (F) red wire to the household red wire
using a wire connecting nut (AA).
□
Connect the receiver (F) white wire to the household white
(neutral) wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
□
Connect the receiver (F) to the fan by connecting the molded
adaptor plug from receiver (F) with molded adaptor from the
fan motor assembly (C) together.
Black
White
Black
F
Red
White
Red
Outlet box
Green or bare wire
AA
C
4
Installing the receiver
WARNING: To reduce the risk of fire or electric shock, remember
to disconnect power. The electrical wiring must meet all local
and national electrical code requirements. The electrical source
and fan must be 110/120 volt, 60Hz. Do not use this product
in conjunction with any variable wall control. Incorrect wire
connection can damage this receiver.
CAUTION: If other fan wires are a different color, have this unit
installed by a licensed electrician.
CAUTION: Do not pull on or cut the receiver leads shorter. Do not
drop or bump the unit.
□
Push the receiver (F) into the bracket on the mounting plate (A)
(as shown, flat side towards the ceiling).
F
8
A
C
B
Publicidad
