Solutions And Problems - Frucosol SELF-SERVICE Manual De Usuario

Some operation problems are due to causes that can be eliminated easily without appealing to the
technical service. Follow it the next indications:
PROBLEM
The juicer doesn't work
It doesn't squeeze properly.
The juicer doesn't eject the
peels.
POSIBLE CAUSE
Is it connected?
Is the switch pressed?
Is the security micro connected?
Are you using the recommended citrus fruits?
Are all the squeezer pieces properly
placed ?
Are you using the recomended
citrus fruits?
Are the peel removers properly placed?

12. SOLUTIONS AND PROBLEMS

SOLUTION
Connect the juicer to the socket.
Press the switch.
Check if the security micro is properly connected.
The use of citrus fruits that are not suitable for the
machine avoid the right working of the juicer.
Remember that you have to use fruits with the
recommended diameter of each model, and follow
the advices you have read in this manual.
Make sure that all the pieces of the squeezer system
are properly placed. Check it paying attention to the
"Part names" chapter of this manual.
The uses of citrus fruits that are not suitable for the
machine avoid the right working of the juicer.
Remember that you have to use fruits with the
recommended diameter of each model, and follow
the advices you have read in this manual.
If the peel removers haven't been placed or done it
in a wrong way then it is possible the peels aren't
ejected. Disconnect the machine and put the peel
removers following the indications of the manual or
the stickers of the machine.
61
EN