Descargar Imprimir esta página

Jonsered LM2146M Manual Del Operador página 8

Ocultar thumbs Ver también para LM2146M:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
If not used properly this lawnmower can be dangerous! This lawnmower can cause serious injury to
the operator and others, the warnings and safety instructions must be followed to ensure reasonable
safety and efficiency in using this lawnmower. The operator is responsible for following the warning
and safety instructions in this manual and on the lawnmower.
Explanation of Symbols on your Jonsered LM2146M
Warning
Read the user instructions carefully to make
sure you understand all the controls and what
they do.
Always keep the lawnmower on the ground
when mowing. Tilting or lifting the lawnmower
may cause stones to be thrown out
Keep bystanders away. Do not mow whilst
people especially children or pets are in the
mowing area
Beware or severing toes or hands. Do not put
hands or feet near a rotating blade.
Disconnect the spark plug before attempting
any maintenance, cleaning or adjustment, or if
you are going to leave the lawnmower
unattended for any period.
Blade continues to rotate after the machine is
switched off.
Wait until all machine components have
completely stopped before touching them.
STOP
General
1. Never allow children or people unfamiliar with these
instructions to use the mower. Local regulations may
restrict the age of the operator.
2. Only use the lawnmower in the manner and for the
functions described in these instructions.
3. Never operate the lawnmower when you are tired, ill
or under the influence of alcohol, drugs or medicine.
4. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Fuel Safety
WARNING - Petrol is highly flammable
-
Wear protective clothing when handling any fuels
and lubricants.
-
Avoid contact with skin. If affected, wash liberally
with soap and water.
-
Remove petrol and engine oil before transporting
the product.
-
Store fuel in a cool place in a container specifically
designed for the purpose. In general plastic
containers are unsuitable
-
refuel outdoors only and do not smoke while refuelling
add fuel BEFORE starting the engine. Never
-
remove the cap of the fuel tank or add fuel while the
engine is running or when the engine is hot
-
if petrol is spilled, do not attempt to start the engine
but move the machine away from the area of
spillage and avoid creating any source of ignition
until petrol vapours have dissipated
-
replace all fuel tanks and container caps securely
-
move the product away from the fuelling area before
starting
-
Fuel should be stored in a cool place away from
naked flames
Preparation
1. While using your product always wear substantial
footwear and long trousers.
2. The use of ear protection is recommended.
3. Make sure the lawn is clear of sticks, stones, bones,
wire and debris; they could be thrown by the blade.
4. Before using the machine and after any impact, check
ENGLISH - 1
Safety Precautions
for signs of wear or damage and repair as necessary.
5. Replace worn or damaged blades together with their
fixings in sets to preserve balance.
6. Have faulty silencers replaced.
Use
1. Do not operate the engine in a confined space where
exhaust fumes (carbon monoxide) can collect.
2. Use the lawnmower only in daylight or good artificial light.
3. Avoid operating your lawnmower in wet grass,
where feasible.
4. Take care in wet grass, you may lose your footing.
5. On slopes, be extra careful of your footing and wear
non-slip footwear.
6. Mow across the face of slopes, never up and down.
7. Exercise extreme caution when changing direction
on slopes.
8. Mowing on banks and slopes can be dangerous.
Do not mow on banks or steep slopes.
9. Do not walk backwards when mowing, you could
trip.Walk never run.
10. Never cut grass by pulling the mower towards you.
11. Release the Operator Presence control to stop the
engine before pushing the mower across surfaces
other than grass and when transporting the
lawnmower to and from the area to be mowed.
12. Never operate the lawnmower with damaged guards
or without guards in place.
13. Do not overspeed the engine or alter governor
settings. Excessive speed is dangerous and
shortens lawnmower life.
14. Disengage all blade and drive clutches before starting.
15. Keep hands and feet away from the cutting means
at all times and especially when switching on the
engine.
16. Do not tilt lawnmower when starting the engine.
17. Never pick up or carry a lawnmower while the
engine is running
18. Spark plug wire may be hot - handle with care.
19. Do not attempt any maintenance on your
lawnmower when the engine is hot.
20. Release the Operator Presence Control, to stop the
engine, and wait until the blade has stopped:-
-
before leaving the mower unattended for any period.
21. Release the Operator Presence Control, to stop the
engine, wait until the blade has stopped and disconnect
the spark plug lead and wait until the engine has cooled:-
-
before refuelling;
-
before clearing a blockage;
-
before checking, cleaning or working on the appliance;
-
if you hit an object. Do not use your lawnmower
until you are sure that the entire lawnmower is in a
safe operating condition;
-
if the lawnmower starts to vibrate abnormally. Check
immediately. Excessive vibration can cause injury.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure the
lawnmower is in safe working condition.
2.
Replace worn or damaged parts for safety.
3.
Only use the replacement blade, blade bolt,
spacer and impeller specified for this product.
4.
Never store the lawnmower with fuel in the tank
inside a building where fumes can reach an open
flame or spark.
5.
Allow the engine to cool before storing in any enclosure.
6.
To reduce fire hazard, keep the engine, silencer,
battery compartment and fuel storage area free of
grass, leaves or excessive grease.
7.
If the fuel tank has to be drained, this should be
done outdoors.
8.
Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.

Publicidad

loading