Engine Oil Recommendation - TOHATSU MFS2.5B Manual Del Propietário

Ocultar thumbs Ver también para MFS2.5B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

22
PRE-OPERATING PREPARATIONS
1. Before opening fuel tank cap, turn air
vent screw two times counterclock-
wise to release air pressure in the fuel
tank.
1
2
1. Two turns the air vent screw
2. Fuel tank cap
6
2. Open the fuel tank cap slowly.
3. Fill the fuel not to over the shown level.
1. Full line
4. After filling the tank, close the tank cap.
ENOM00037-A

3. Engine oil recommendation

ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before starting engine. (To
properly fill the engine with oil follow the
instructions, See page 45)
ENOF00209-A
1
ENOF00210-0
CAUTION
Use only high quality 4-stroke engine oil to
insure performance and prolonged engine
life.
The SAE oil viscosity 10W-30 or 10W-40
outboard motor engine oil is recom-
mended.
You can also use oils that carry the API rat-
ing of SH, SJ, or SL. Select the appropri-
ate viscosity, based on atmospheric
temperature, from the chart below.
10W−40
10W−30
-30
-20
-10
0
10
-22
-4
14
32
50
ENOW0002A-A
CAUTION
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOF00240 0
20
30
40
˚C
68
86
96
˚F
ENOF00208-0

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs3.5b

Tabla de contenido