Frizzlife PX500-A Manual Del Propietário página 12

Model: PX500-A
Power-on
When the system is powered on, you will hear a beep. All indicators will be
on for 3 seconds, and then the system will automatically flush for 30 seconds.
After flushing, if there is no water production, it will turn into standby status.
The power indicator will always light in blue when the system is plugged in.
Water production
When the system is producing water, the power indicator will flash in blue.
Filter life indicator
Different colors suggest different remaining lifespan:
A. Indicator constant lit in blue: the filter is normally working
B. Indicator flashed in red: the filter lifetime is about to be expired
(remaining lifespan <5%)
C. Indicator constant lit in red:the filter is expired
Note: If the filter is expired, the buzzer will keep beeping when producing water
!
to remind users of replacing filter. Filter life may vary depending on source
water quality and water usage.
Long-time operation reminder
When the system keeps producing water continuously for 30 minutes, the
system will enter into protection status and all the components stop working.
The indicators will flash in red. In this condition, please unplug the power for
10 seconds then power on again.
Automatic flushing
A. Flushing when powered on: when powered on, the system will be
automatically flushed for 30 seconds.
B. Flushing when cumulative water production reaches 10 minutes:
If the cumulative water production reaches 10 minutes, after returning
into standby status, it will be automatically flushed for 10 seconds.
C. Flushing when constant water production: if the system constantly
keeps producing water for 10 minutes, it will be automatically
flushed for 15 seconds.
EN