Frizzlife PX500-A Manual Del Propietário página 5

Model: PX500-A
4. Installation Tips
How to cut the tubing?
Please cut the tubing into two sections in proper length, make sure cut
them squarely and cleanly.
How to connect/disconnect the tubing?
To connect:
To disconnect:
Note:
0.5 inch.5
Remove
blue clip
How to drill a hole on my sink (Optional)
Note：Please remember to wear safety glasses to protect your eyes
!
before proceeding.
Use a 1/2" metal bit to drill. The recommended diameter of the hole
ranges from 1/2" to 1.2" .
please push the tubing into the fitting and make sure it is fully
inserted. Then put the blue lock clip on the fitting, it will lock
the tubing in place.
please remove the blue lock clip from the fitting, push in the
lock sleeve, and then pull out the tube from the fitting.
If the tubing is not fully inserted, water leakage may occur.
Pulling out the tubing directly will damage the fitting,
which may also cause water leakage.
Press
Remove
1. Insert to seal the connection
2. Remove to disconnect
EN