Frizzlife PX500-A Manual Del Propietário página 13

Model: PX500-A
Manual flushing
When the system is in standby status, press the "Flush" button, the system will
start flushing. Press the "Flush" button again to stop.
! Note: When the system is being flushed, the indicator will flash in blue.
Reset button
A. Select filter: when the system is powered on, long press the "Reset" for 3
seconds, the buzzer will beep and you can start to select the filter you want to
change. Press "Reset"button to change between the filters and the selected
filter lifetime indicator will flash.
B. Reset: after selecting the filter, long press "Reset" button for 3 seconds. You
will hear a beep. The selected filter's indicator will return to blue light once
the filter is changed and sucessfully reset. If you do not operate within 10
seconds, it will automatically exit this mode and resume normal display.
C. Revocation of reset: select the wrong-operated filter, long press "Reset" and
"Flush" buttons for 3 seconds. The buzzer will beep for 3 times. The filter
indicator will return to the color status before reset. (Note: the reset can be
revoked within 5 minutes. If the system is powered off after the reset, the
revocation will be invalid.).
8. Replacement of Filter Cartridge
The replacement filer cartridges are: PP+CB 2-in-1 filter ，RO membrane and post
carbon filter
Please replace filter cartridges regularly according to the recommended replacement
period shown below.
Filter
Position
1st stage PP+CB 2-in-1 filter
2nd stage RO membrane
3rd stage Alkaline filter
Model Number
ASR311
ASR312-500G
ASR313-A
Recommended
Replacement Period
6 months or cumulative water
production for 30 hours
(around 450-500gal)
Two years or cumulative
water production for 120
hours(around 1800-2000gal)
one year or cumulative water
production for 60 hours
(around 900-1000gal)
EN