eSolutions PULSAR PLUS Guia De Instalacion página 13

INSTALLATION
NEMA plug-in installation
Ensure the NEMA receptacle is correctly installed before connecting your charger. See instructions on Page 9.
Follow our recommendations
for location and positioning
the charger (page 8).
≈ 8
≈ 20 cm
Make sure the outlet is powered off!
"
Placement
1.
Using a wall stud finder, find the wall stud
nearest to the NEMA outlet. Mark a vertical line
approximately 20" (50cm) in length in line with
the wall stud.
Alternately you may find a suitable location on
a solid wall.
2.
Ensure that the placement of the NEMA
outlet and your charger will allow for an adequate
connection of the 12" (30cm) NEMA cable.
3.
Carefully lift the charger from the box, plug
the NEMA cable into the outlet, and position the
charger centered on the vertical line. Position the
charger such that the NEMA cable has a gentle
curve and is not stretched. Mark a horizontal line
at the bottom of the charger.
4.
Unplug your charger and carefully place it
back in the packaging box while you continue.
Installing the wallplate
1.
Remove the tape from the wallplate to detach
it from the charger.
2.
Place the wallplate with the bottom edge
aligned with the horizontal line and the center
holes aligned with the vertical line. Mark the
location of the holes.
EN
13