Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTALLATION
Operating
NOTE: Once you have powered on the connected circuit, your charger will be ready to charge your EV. To fully
access your charger functions and control your charger remotely, however, you will need to download the app to a
mobile device (smartphone or tablet) and register your charger following the directions below.
Wallbox Chargers S.L.U.
PN:XXXX-X-X-X-X-XXX-X
----
20
E506750 EVSE
Powering on
If you have installed a NEMA plug-in model,
insert the NEMA plug in the receptacle.
For all models, once all electrical connections
have been safely made, switch on the power to
the circuit from the circuit breaker.
The charger LED ring should light up in a steady
green. If the LEDs are not lighting, power off the
circuit at the circuit breaker and contact your
electrician to ensure proper electrical installation.
Guide to LEDs
Green: Ready.
Light blue: Connected to EV, ready for charge.
Dark blue (pulsing): Charging.
Yellow: Locked.
Red: Error (see troubleshooting section at page 18).
Registering and
connecting your charger
Download the app to your smartphone
or tablet, log in and follow the on-screen
instructions to create an account and register
your charger. You will need to verify your
account with a valid email address.
Publicidad
