Descargar Imprimir esta página

eSolutions PULSAR PLUS Guia De Instalacion página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
GETTING STARTED
Safety instructions
SAVE THESE INSTRUCTIONS | INSTRUCTIONS PERTAINING TO RISK OF FIRE OR ELECTRIC SHOCK.
WARNING: When using electric products, basic precautions should always be
followed, including those below. This manual contains important instructions that
cover the safe installation, operation and maintenance of the unit.
• Read all instructions before installing and using your Free2move Charge Wallbox
charger.
• Permanent (hardwired) connection of your charger and/or installation of
electrical circuits, conduit, and NEMA receptacles must only be performed by a
qualified electrician in accordance with all local electrical codes and ordinances.
Unauthorized installation or modifications will void the manufacturer's warranty.
• This device should be supervised when using around children.
• Do not put fingers into the electric vehicle connector.
• Do not use your Free2move Charge Wallbox charger if the flexible power cord or
EV cable is frayed, has broken insulation, or any other signs of damage.
• Do not use your Free2move Charge Wallbox charger if the enclosure or the EV
connector is broken, cracked, open, or shows any other indication of damage.
• Do not operate your Free2move Charge Wallbox charger in temperatures outside
its operating range of -22ºF to 104ºF (-30ºC to 40ºC).
• Do not open your charger in rain or other inclement weather.
• Do not open the front cover of your charger while it is connected to the power
supply.
• Install your charger in a sufficiently ventilated location and avoid installation
in areas with direct sunlight.
• Do not install your Free2move Charge Wallbox charger near flammable,
explosive, or combustible materials.
• In case of flooding, do not operate your charger while it or your vehicle is
submerged in water.
• If your charger was submerged in water due to flooding, have a qualified
electrician inspect your charger prior to energizing or using your charger again.
Warning for AC plug-in products: Grounding instructions
Your Free2move Charge Wallbox charger must be grounded. If it should malfunction
or break down, grounding provides a path of least resistance for electric current
to reduce the risk of electric shock. Your charger is equipped with a cord having an
equipment grounding conductor and a grounding plug. The plug must be plugged into
an appropriate receptacle that is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor may
result in a risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product. If it does not fit the receptacle, have a
proper receptacle installed by a qualified electrician.
6

Publicidad

loading

Productos relacionados para eSolutions PULSAR PLUS