RRC -SMB-CAR Manual De Instrucciones página 3

.EN Instruction manual
Automobile power supply network
It is essential that you first verify the maximum power rating of the

power supply network of the automobile in which you intend to use this
power supply.
You can do this by reading the instruction manual of your automobile,

consulting your automobile reseller or contacting the original
manufacturer of your automobile.
Most new automobiles are fitted with a higher power (eg. 12V, 15A)

cigarette lighter connector and/or power outlet.
Some older automobiles or even newer budget models may have a

lower power rating on their power supply network which provides
power to the cigarette lighter connector or power outlet. If the power
rating is insufficient then you may not use this product in your
automobile.
Please make sure that you comply with all traffic regulations in the
country you are currently travelling which relate to the use of the
mobile device while driving.
Usage instructions
Dependent upon the status of the vehicle's battery, it is possible to

experience a power outage. This can cause the connected device to
reset.
In order to avoid unnecessarily discharging of the vehicle battery, use

the car adapter with the motor running.
The car adapter automatically switches off if a certain low voltage level

is reached (under voltage protection).
In certain types of vehicles the car adapter can only be used if the

ignition is turned on. Please consult the user manual for your vehicle or
contact your vehicle reseller for more information.
The car adapter will become warm during use. This is normal. The

adapter is fitted with an over temperature protection.
Prevent metallic objects from coming into contact with the metal parts

of the DC output plug of the power supply. If this happens, a short
may occur and the unit may be damaged.
To disconnect the power cord, pull it out by the plug. Never pull the

power cord itself.
Over-temperature switches off the car adapter. It can turned on by

restarting the adapter (remove CLP from the socket and then insert
again).
Do not use an USB-cable longer than 1m (3 feet).

Technical data
Input voltage 11 - 32VDC
Switch off voltage 10VDC
Input fuse 12A in CLP
Output voltage main 24VDC
Output current main 3.5A max.
Output power main 85W max.
Output voltage USB 5VDC
Output current USB 1A max.
Output power USB 5W max.
Operating temperature -20 to 40°C
Storage temperature -40 to 85°C
Measurements (LxWxH) 115 x 53.7 x 21.5mm
Total weight 250g
Declaration of conformity / approvals
The car adapter complies with the current regulations of the EU guidelines.
However we cannot guarantee that other devices will won't be affected by
interference.
FCC advice
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Patents
This product is protected by patents: US 7,108,528 and US 7,408,132.
3
