Publicidad
Idiomas disponibles
Idiomas disponibles
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended Use
The petrol strimmer is intended for cutting
grass in the garden, along flower beds,
around trees or fence posts, and light un-
dergrowth.
Any other use not explicitly authorised in
these instructions may result in damage to
the equipment and represent a serious haz-
ard to the user.
The equipment is not designed for cutting
bushes, small trees or similar plants. The
equipment is intended for use by adults.
Young people over the age of 16 may use
the equipment only under supervision.
The manufacturer is not liable for damages
caused by use other than for the intended
purpose or by incorrect operation.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
General Description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Delivery Contents
Start by unpacking the equipment and
check that it is complete. Dispose of the
packaging material correctly.
• Engine housing with upper shaft tube
and unmounted multifunction handle
• Lower shaft tube
• Thread spool
• 3-toothed blade
with transport protection
• Protective cover
• Carrying harness with hip protector
• Service key
• 2 x hexagon socket wrench,
4 mm & 5 mm
• Assembly materials
• Fuel mixing bottle, volume 500 ml
• Accessory bag
• Instruction Manual
Functional Description
The hand-operated and portable petrol
strimmer features a combustion engine to
drive the blades, which is in operation
without interruption while in use. The pow-
er is transmitted via a clutch disc, which
uses a high-revolution centrifugal clutch to
transfer the engine output to the strimming
unit.
In the cutting process, two plastic wheels ro-
tate about an axis vertical to the cutting level.
A 3- or 4-toothed blade can be mounted as
an alternative to the double thread spool.
To protect the user, the equipment has a
protective device, which covers the cutting
device.
Please refer to the descriptions below for
how the operating parts work.
GB
MT
33
Publicidad
