Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
give a strong pull on the thread end.
If no thread ends are visible:
•
Replace the thread reel (see chapter on
"Changing the Reel").
Caution! Thread remnants
may be thrown out and cause
injuries.
Working using the 3- or
4-toothed blade
Always wear the harness
and suitable protection cloth-
ing when working with the
device. Wear eye, hearing
and head protection.
Ensure that the blade is in-
stalled correctly. Replace
damaged or blunt tool parts.
There is a risk of injury.
Only use the cutting blade to work
on open, even areas. Carefully in-
spect the area to be cut and remove
all foreign bodies. Avoid hitting
stones, metal or other obstacles.
The blade can be damaged and
there is a risk of kickback by the
machine.
• When working, hold the cutter above
the ground and slowly swivel the device
back and forth like a scythe in an equal
arch.
• Do not hold the cutting head at an an-
gle.
• Do not use the device to cut wild growth
or brushwood.
• Regularly check the blades for damage
and replace as needed.
46
If the Equipment Vibrates
Clean the equipment, remove any grass
remnants present on the cutting head and
in the protective cover.
Care and Maintenance
The maintenance and clean-
ing work must always be
carried out with the engine
switched off and the spark
plug connector removed (
Have any work not described
in these instructions carried
out by our service centre.
Never use metallic threads or
saw blades. The use of such
non-original parts can cause
personal injury and irrepara-
ble damage to the equipment
and will result in immediate
invalidation of the guarantee.
Cleaning the Equipment
•
Clean the cutting device and protective
cover of grass and earth after each cut-
ting procedure.
•
Always keep the handles clean and
free of grass.
•
Clean the equipment with a soft brush
or a damp cloth.
Protect the equipment from
damage! The equipment is to be
neither sprayed with water nor placed
in water. Do not use detergents or sol-
vents. These could cause irreparable
damage to the equipment.
2).
A
Publicidad
