AEG IPE84571IB Manual De Instrucciones página 82

The sides of the zones which operate
together light up, and they are linked with
shorter illuminated lines. You choose the
combination of the sections by choosing the
mode applicable to the size of the cookware
you want to use. There are three modes:
Standard (activated automatically when you
activate the hob), Big Bridge and Max Bridge.
To set the heat setting use two left side
control bars.
Switching between the modes
To switch between the modes use sensor
field: .
When you switch between the modes the
heat setting is set back to 0.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible. Place the cookware centrally on the
selected area!
Place the cookware with the bottom diameter
smaller than 160 mm centrally on a single
section.
82 ENGLISH
Place the cookware with the bottom diameter
larger then 160 mm centrally between two
sections.
6.2 FlexiBridge Standard mode
This mode is active when you activate the
hob. It connects the sections into two
separate cooking zones. The sides of the
zones which operate together in this mode
light up, and they are linked with shorter
illuminated lines. You can set the heat setting
for each zone separately. Use two left side
control bars.
100-160mm
> 160 mm