Lorelli LYNX Instrucciones De Uso página 15

INSTALLATION OF SEAT "Group II;III" / 15 to 36 kg./
With 3-point seat belt + additional attachment (FIT).
IMPORTANT: When using the seat for group 2;3 15-36 kg. You should remove the buckle pads and baby
insert Picture A positions 9;13;14 and to hide the buckle and shoulder belts under the upholstery.
Step 1. Release the 5 point harness of the child seat as pushing the red button of the buckle. Picture 42
Step 2. Loose the harness straps by pressing the release button and pulling the harness straps as far as you
can. Picture 43 Note: Do not pull the shoulder pads.
Step 3. Open the lid in the backrest of the upholstery ( Picture 44 ) and hide the shoulder belts into the
opening ( Picture 45;46) Close the lid. Hide the buckle under the upholstery into the opening of the seat
( Picture 47 ) . Pull the strap in the middle of the seat and hide it back through the opening under the
upholstery. The car seat must be looks like picture 48.
Step 4 . Please repeat the steps from 1 to 6 for installation on the car seat described in Group I
/ 9 to 18 kg. / With 3-point seat belt + additional attachment (FIT)
Step 5. Place the child into the safety seat. Position the shoulder belt through the hook over the shoulder of
the child and lap belt over the seat and lap of the child. Picture 50 Pass the belt through the lower opening
into the seat of the safety seat and fasten the clip to corresponding buckle until click is heard.
Picture 50 Check that the belt buckle is locked by pulling the belt. Picture 51
Step 6. Make sure the belt is properly positioned across all guides, not twisted and does not interfere with the
child.
Press the Release buttons and retract the ISOFIX connectors into the seat Picture 41
Please use 3-point safety belts of the car to ensure the safety of the child and to secure the child seat!
Step 1. Group II ; III from 15 to 36 kg. Place the child seat on the seat of the car, it must be oriented in the
direction of movement in an upright position. Picture 49B
Step 2. Place the child into the safety seat. Position the shoulder belt through the hook over the shoulder of
the child and lap belt over the seat and lap of the child. Pass the belt through the lower opening into the seat
of the safety seat and fasten the clip to corresponding buckle until click is heard. Check that the belt buckle
is locked by pulling the belt. Picture 50;51
INSTALLATION OF SEAT
" Group II; III " / 15 to 36 kg / With 3 - Point Belt .
15