Mounting the oven
1.
Slide the oven partly into the recess.
Lead the connection cable to the power
source.
2.
Slide the oven completely into the
recess.
Fasten the oven using the two screws
3.
(4 x 25 mm) provided.
Make the electrical connection. Check
4.
that the appliance works.
02
02
01
01 Door handle
02 Side handle
After the installation is complete, remove the protective film, tape, and other
packing material, and take out the provided accessories from inside of the oven. To
remove the oven from the cabinet, first disconnect power to the oven and remove
2 screws on both sides of the oven.
Be sure to hold the appliance with 2 side
handles and door handle when unpacking
the product.
English 13