Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
SPECIAL CONDITIONS REGARDING SAFETY OF DEMOLITION HAMMER OPERATION
• Use hearing protection measures during work. Exposure to noise may cause hearing loss.
• Use the power tool with additional handles supplied with the power tool. Loss of control may cause
operator injury.
• Whenever tool can hit hidden electric wires during operation, hold the power tool only by insulated
handles. Contact with electric wire may transfer voltage to metal parts of the power tool and cause electric
shock.
• Use proper equipment to locate hidden power lines. Contact with live wires may cause fire or electric
shock. Damage of gas installation pipe may cause explosion. Ingress to water line may cause electric shock
and cause major property damage.
• Each time before connecting the power tool check the power cord, in case of damage hand over to
authorized workshop for replacement.
• When operating the power tool hold it in both hands while keeping stable body position. Keep the
handles clean. Power tool is safer when held with two hands.
• When operating the power tool held high, stand firmly on the ground and ensure there are no
bystanders below.
• Do not direct operating power tool at other persons or at yourself.
• If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent
in order to avoid a safety hazard.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used, neverthe-
less there is always a small risk of operational injuries.
1
2
1. CAUTION! Take special precautions.
2. Read instruction manual, observe warnings and safety conditions therein.
3. Device with class II insulation.
4. Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
5. Disconnect the power cord before starting maintenance or operation.
6. Protect against rain.
7. Keep the tool away from children.
8. Use protective clothing.
CONSTRUCTION AND USE
Demolition hammer is a hand-operated power tool with insulation class II. The tool is driven by single-phase
commutator motor with rotational speed reduced with gear transmission. Power tools of this type are widely
used for works in concrete, brick and similar materials. Range of use covers repair and building works, and any
work from the range of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. SDS Max chuck
2. Fixing sleeve
DEMOLITION HAMMER
58G876
DETAILED SAFETY REGULATIONS
3
4
11
5
6
7
8
Publicidad
