Maintenance And Metrological Verification; Unpacking - Repackaging; Cleaning; Replacing The Battery - Metrix MX 21 Manual De Instrucciones

1.5 Maintenance and metrological verification

Return your instrument to your distributor for any work to be done
within or outside the guarantee.

1.6 Unpacking - Repackaging

This equipment has been fully checked out mechanically and
electrically before shipping.
All precautions have been taken to ensure that the instrument arrives
at its destination undamaged.
However, it is advisable to carry out a rapid check for damage
sustained in shipping. If there is any evidence of damage, make this
known immediately to the shipper.
!
Should you need to return the multimeter, preferably use
the original packaging and indicate the reasons as clearly
as possible on an accompanying note.
Our products are patented in FRANCE and internationally
and the logotypes are registered. We reserve the right to
modify
technological improvements.

1.7 Cleaning

Clean the instrument using a damp cloth and soap. Never use
abrasive or solvents.

1.8 Replacing the battery

"
Before replacing the battery, disconnect test leads from
any circuit under test, turn the meter off and remove test
leads from the input terminals .
Use the following procedure :
1 - Disconnect test leads from any inputs terminals.
2 - Using an appropriate tool, slide off the case bottom of the
instrument.
3 - Replace the battery.
4 - Replace the removable part.
specifications and prices
BATTERY 9 V
as required
6LF22
by