4. GENERAL SPECIFICATIONS
•
Mechanical features :
Dimensions : 170 x 80 x 35 mm
Weight (with battery) : 285 g
•
Packing : Dimensions : 230 x 155 x 65 mm
Weight : 385 g
•
Power supply : 1 battery 9 V (type 6LF22 or 6LR61)
Battery life : approx. 300 hours with battery 6LR61
« BAT » : battery discharge indicator
•
Buzzer : continuous beep for the continuity test
intermittent beep each time the switch is operated or
keys are pressed, and for overload indication
Response time < 500 ms
•
Climatic conditions :
Reference temprature :
Operating temperature :
Use temperature :
Storage Temperature :
Relative humidity : use
Water-tightness :
•
Safety : IEC 61010-1 (1993) + A2 (1995)
Insulation : class 2
Pollution degree : 2
Indoor use
Altitude < 2000 m
CAT III, 600 V max. to earth
•
EMC :
Emission acc. EN 50081-1, 1992
Immunity acc. EN 50082-1, 1997
5. ACCESSORIES
5.1 Delivered with the multimeter
1 set of test leads........................................................ AG0475A
1 battery 9 V (6LF22) ..................................................... AL0042
1 protective elastomer case ......................................HX0002 (∗)
1 user's manual ........................................................906129639
( ∗ ) version « multimeter in a blister », only.
5.2 Optional
Mini-clamp ............................................................... AM0089NZ
Protective elastomer case..............................................HX0002
storage
Influence in range 20 mV
Influence in range Ohm :
23°C ± 5°C
0°C to 45°C
0°C to 50°C
-20°C to 60°C
< 80 %
< 95 %
IP 40
: + 2 mV
DC
+ 0.5 %
(end of scale)