Publicidad
Idiomas disponibles
Idiomas disponibles
1. INTRODUCTION
This control unit has been developed to drive automatic single-phase barriers.
= Electrical connections confi gured at the factory.
2. MAIN CHARACTERISTICS
- Microprocessor logic
- LEDs displaying input status
- Integrated radio receiver 433MHz 2 channels, 2048 codes
- Plug-in radio connector (not installed)
- 2-digit display
- Confi gurable outputs
- PROGRAMMER connector for receiver
F3
F2
J2
J1
L
N
E
24
Vac
J1:
230Vac terminal board
J2:
Flashing light and motor terminal block
J3:
Plug-in radio connector (not installed)
J4:
External accessories power supply, and outputs terminal block
J5:
Expansion module
J6:
Radio antenna and inputs terminal block
J7:
Encoder terminal block
3. TECHNICAL SPECIFICATIONS
- Power supply:..........................................................................230Vac ±10%, 50/60Hz
- Motor power supply:...........................................................................230Vac; 3A max
- Traffi c light output:............................................................................230Vac; 40W max
- Accessory output:...................................................................................24Vac; 1A max
DL
F
SW1
SW2
J7
F1
J4
2nd
CH
RX
J5
J3
J8
J10
J6
J10:
PROGRAMMER connector for receiver
DL:
2-digit display
SW1: "START" control button
SW2: "PDM" control button
F1:
Accessories and outputs fuse: 5x20 1A T
F2:
Fuse: 5x20 6.3A T
F3:
Fuse: 5x20 250mA T
F, -, +: Programming push buttons
PR2
PR1
15
CSB-BR -
Publicidad
