Handling And Installation; Lifting And Carrying The Packed Machine; Checking The Machine On Delivery; Unpacking - IPC Gansow Ct100 Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

Alternatively, the machine can be sent to the Manufacturer for a thorough overhaul.

If the machine is not used anymore, it is recommended that batteries are removed and

deposited at an authorized collecting centre.

Moreover, it is recommended that you make harmless those parts of the machine that

could be dangerous especially to children, who could use the machine for their games.

5.1

Lifting and carrying the packed machine

In all lifting operations make sure that the packed machine has been tightly

anchored to the pallet, in order to avoid any overturning or accidental falls.

Loading and/or unloading from the motor vehicles must be performed in an

The machine, which is packed on a wooden pallet by the Manufacturer, must be loaded

by means of proper handling machines (refer to the EEC provision 89/392/CEE and

following amendments), onto the carrier and, once it has arrived at the appointed

destination, unloaded by similar means.

The brushes and the squeegees are packed in cardboard boxes without pallet.

The packed machine body must be lifted only with a fork lift truck. Handle with care to

avoid bumps or overturnings.

5.2

Checking the machine on delivery

On delivery check with attention that the package and the machine are not damaged. In

the event that the machine has suffered any damages, report so to the carrier; before

accepting the goods, reserve by written the right to present a claim for the refund of the

damages.

5.3

Unpacking

On unpacking the machine, the operator must be provided with the necessary

accessories (e.g. gloves, protective goggles etc.) to limit possible hazards of

Unpack the machine in the following way:

• cut and remove the plastic straps with scissors or nippers;

• remove the cardbox;

• remove the envelopes inside the battery compartment (within the solution tank) and

check its contents:

envelope 1:

envelope 2:

Keep one of the 2 keys safe so that it can be located in case the other one is lost;

the other key is to be inserted in the lock on the mushroom switch.

• depending on the model, remove the metal brackets or cut the plastic straps, which fix

the machine chassis to the pallet;