Snooper Truckmate S6000 Guia De Inicio Rapido página 4

To utilise the AURA™ Camera database you will need to register your Truckmate and
perform a download. Please refer to 'Registering your Truckmate' , 'System Requirements
and Software Installation' later in this Quick Start Guide for further information.
Start Up
1. Installing the SD Card
Before using your Truckmate, you will need to install the SD Card included with the
device. The SD Card comes complete with a digital map of the UK and Ireland or Western
Europe depending on the model purchased and is also where the AURA camera
TM
database is stored if you choose to subscribe and download it.
Remove the SD card from its packaging and insert it into the SD Card slot as indicated.
Switch on the device by pressing and holding the standby power button located on the
top right hand side of the unit for 2 seconds. As soon as the device is switched on, the
Truckmate will automatically synchronise with the SD Card. Once the synchronisation is
completed, the SD Card will not function with any other device. Your Truckmate is now
ready to navigate and the camera database can be downloaded if necessary.
Please note that if the unit does
not activate when you press and
hold the standby power button for
2 seconds it may require charging.
Refer to the section 'Charging the
internal battery' later in this guide.
SD Card
4 • UK