Publicidad
Idiomas disponibles
Idiomas disponibles
1. Starting Up
Once you have synchronised the SD Card it is time to perform the first Start Up.
First make sure your vehicle is parked in as open a space as possible, clear of tall
●
●
trees and buildings so that the built in GPS antenna has a clear view of the sky above.
Next, switch the unit on by pressing and holding the standby power switch on the top
●
●
right hand side of the unit for 2 seconds.
Press the 'I Agree' button when available and the screen will display a section of a map.
●
●
Truckmate needs to acquire a minimum of four satellites in order to work. Once this has
●
●
been achieved the Truckmate will ascertain your position and this will be indicated by a
green arrow icon on the on-screen map and the GPS signal strength will be shown to the
bottom right hand corner of the display. Your Truckmate is now ready to navigate.
As the GPS engine and antenna have never been used before, the first 'Cold' start
could take anywhere from 15 – 30 minutes to establish a satellite connection. Once
initialised, subsequent start ups will take less time and eventually should take only
a matter of minutes.
2. Easy Set Up
Screen settings - There are a number of map views or different types of information that
can be displayed on the screen at any one time:-
3D
Operating Instructions
2D
8 • UK
North
Publicidad
